Basler Electric BE1-40Q - Manual (Page 34)

CONNECTIONS
Be sure to check the model and style number of a relay before connecting and energizing the relay.
Incorrect wiring may result in damage to the relay. Except where noted, connections should be made with
wire no smaller than 14 AWG.
Typical sensing input connections are shown in Figure 4-13. Typical output connections are shown in
Figure 4-14. Internal wiring diagrams are shown in Figures 4-15 through 4-16. All connections shown in
this manual assume ABC rotation.
Figure 4-13. Sensing Input Connections
4-14 BE1-40Q Installation 9171500990 Rev N