3 data types, 1 type e_s_ups_mode, 2 type e_s_ups_state – BECKHOFF CX9020 User Manual
Page 37
Commissioning
4.2.3
Data Types
4.2.3.1
TYPE E_S_UPS_Mode
eSUPS_WrPersistData_Shutdown: write persistent data and then QuickShutdown
eSUPS_WrPersistData_NoShutdown: write persistent data only (no QuickShutdown)
eSUPS_ImmediateShutdown: QuickShutdown only (no writing of persistent data)
eSUPS_CheckPowerStatus: determine status only (neither write persistent data nor QuickShutdown)
Prerequisites
Development environment
Target plat
form
Hardware
PLC libraries to include
TwinCAT v2.11R3 Build 2047 or higher
PC (i386)
Seconds UPS
TcSUPS_CX9020_U900.
Lib
4.2.3.2
TYPE E_S_UPS_State
eSUPS_PowerOK:
in all modes: supply voltage is OK
eSUPS_PowerFailure:
in all modes: Supply voltage faulty (applied for one cycle only)
eSUPS_WritePersistentData:
in eSUPS_WrPersistData_Shutdown mode: writing of the persistent data is active
in eSUPS_WrPersistData_NoShutdown mode: writing of the persistent data is active
eSUPS_QuickShutdown:
in eSUPS_WrPersistData_Shutdown mode: QuickShutdown is active
in eSUPS_ImmediateShutdown mode: QuickShutdown is active
eSUPS_WaitForRecover:
in eSUPS_WrPersistData_NoShutdown mode: wait for return of the voltage
in eSUPS_CheckPowerStatus mode: wait for return of the voltage
eSUPS_WaitForPowerOFF:
in eSUPS_WrPersistData_Shutdown mode: wait for shutdown by the UPS
in eSUPS_ImmediateShutdown mode: wait for shutdown by the UPS
Prerequisites
Development environment
Target plat
form
Hardware
PLC libraries to include
TwinCAT v2.11R3 Build 2047 or higher
PC (i386)
Seconds UPS
TcSUPS_CX9020_U900.
Lib
CX9020
37
Version 1.1