Dot Hill Systems II 200 FC - Manual (Page 42)

2-6 SANnet II 200 FC, SATA, and SATA SE Array Installation, Operation, and Service Manual • March 2005
Note –
SANnet II family arrays require at least CAT-5 Ethernet cable.
See the following preinstallation worksheet for additional preparation details.
2.8 Preinstallation Worksheets
Before ordering an FC, SATA, or SATA SE array, complete the preinstallation
worksheets on the following pages and then prepare the site for installation according
to the site planning requirements.
Note – If you are connecting to several hosts or fabric switches, make as many copies
of Table 2-5 as you need and label them appropriately.
■
You are responsible for ensuring that the site consistently conforms to all stipulated
standards and that necessary peripherals are made available to the engineer during
installation.
■
Review the details of your specific survey before installing your array.
■
If necessary, attach or sketch a network diagram to the survey.