Bladez Fitness E500 Elliptical User Manual

Page 31

Advertising
background image

31

H.R.C. (Heart Rate Control Program), 75% H.R.C., 85% H.R.C. All the exercise data of

Time, Distance, Calories and Pulse will reset to zero.

OPERATION INSTRUCTION

Plug in the adaptor into the equipment. The monitor will produce a beep sound and the

monitor will turn on

Determine the User (Only While in the STOP Mode.)

1. Press the User button to goto the USER DATA, only can use on the stop mode.

2. Press "ENTER" for the USER SELECT.

3. Press the "UP(+)" or "DOWN(-)" button to select the User from U1 to U4.

4. Press "ENTER" to decide the User.

5. Press the "UP(+)" or "DOWN(-)" button to set your height, and then press the "ENTER"

to confirm your setting value.

6. Press the "UP(+)" or "DOWN(-)" button to set your weight, and then press "ENTER"to

confirm your setting value.

7. Press the "UP(+)" or "DOWN(-)" button to select your age, and then press "ENTER"

to confirm your setting value.

8. Press the "UP(+)" or "DOWN(-)" to select your sex, and then press "ENTER" to confirm

you are M (male) or F (female).

Finish the user data input. Program select and setting value.

C-1 MANUAL PROGRAM

• Press the "UP(+)" or "DOWN(-)" button to select the Manual program, Press the

"ENTER" button to confirm the manual program.

• The Time display will flash, and then press "UP(+)" or "DOWN(-)" to set up the desired

time for the exercise. Press "ENTER" button to confirm your setting value.

• The Distance display will flash, then press "UP(+)" or "DOWN(-)" button to set the

desired distance value. Press "ENTER" button to confirm your setting value.

• The Calories display will flash, and then press "UP(+)" or "DOWN(-)" button to set

the desired calories to be burned. Press the "ENTER" button to confirm your setting.

• Press "START" to begin exercise.

Note: 1) Time and distance cannot set up at the same time in this program. 2) When you

reach the target, the monitor will produce a beep sound and stop. 3) If you set more than

one target, and you would like to reach next target, press START to exercise again.

Advertising