Bluelab pH Controller Connect Manual - Manual (Page 20)

English
20
29.0 Technical specifi cations
pH
Control parameter
pH - user selectable single direction
(up or down)
Control range 0.1 – 13.9 pH
Dose rate 10 ml per minute
Resolution 0.1 pH
Accuracy at 25°C/77°F ±0.1 pH
Calibration
Two or three point
(pH 7.0 and pH 4.0, and/or pH 10.0)
Temperature compensation
Yes
(if temperature probe is in the
same solution as pH probe)
Operating environment 0 - 50°C / 32 - 122°F
Signal range
Indoor / Urban: Up to 66 feet / 20 meters
Outdoor / RF line-of-sight:
Up to164 feet / 50 meters
Frequency band 2.4 GHz ISM
System Requirements
Microsoft Windows XP or greater for Bluelab
Connect Software. *Internet connection
required for data logging to the cloud
Certifi cations
CE, FCC, IC.
Contains Model XBEE2 Radio, IC:
4214A-XBEE2, FCC ID: OUR-XBEE2
Power source
Input: 100-240 Vac, 50-60 Hz, 5 VA,
4 interchangeable plug types
(USA, Euro, UK, NZ/AUS)
Output: 24VDC 0.4Amp
Screen display languages
English, Deutsch, Español,
Français, Nederlands