Bolide SVR9000DMOB_W - Manual (Page 12)

User Manual
8
In Main menu or sub menu mode, clicking right key will exit current menu.
Double-click Left
key of Mouse
In live display or playback mode, double-clicking left key will maximize the
screen.
Moving Mouse Select menu item
Sliding Mouse On motion mode, sliding mouse will select motion area; On [Color set] menu
mode, sliding mouse will adjust color control bar and volume control bar.
Chapter3 Connecting MDVR
The device installation
Installation mode for the device includes horizontal installation and rack installation.
1. Horizontal installation: Place the equipment on a stable installation surface horizontally, and then
tighten it to the surface through four screws.
2. Rack installation: When limited space lead the equipment to not install horizontally, user can
adapt rack installation to mount on the side and wall of car.
Depart the device from anti-vibration rack before installing, and then please follow the below steps to
install the device:
z Loosen three screws on the front panel shown as Picture 3-1.

z Take the device away from the anti-vibration rack.
z Install anti-vibration rack to vehicle with screws.
z Fix the device back the anti-vibration rack with previous three screws.
z Finish the device installation.
 Removeable HDD installation
Please follow the below steps to install the HDD:
1. Take out removable HDD from the HDD box;
2. Loosen the screw and remove PCB board;
3. Remove the upper cover of HDD box;
4. Put the HDD on the anti-vibration rack and connect SATA port of data cable to HDD;
5. Insert the HDD to the HDD box with screws;
6. Install the upper cover back HDD box with screws;
7. Tighten the PCB board back HDD box with screws;
8. Finish the installation processing.

Picture 3-1 Picture 3-2