2 output mode, 3 privacy zone – Bolide SVR9000DMOB_W User Manual
Page 17
User Manual
13
5.3.1.2 Output mode
Go to [Main menu
ÆDisplayÆOutput] to enter into the output set interface shown as Picture 5-5.
5.2.1.3 Privacy Zone
The function Allow you configure privacy zone parameters according to Picture 5-8. Each channel could
configure up to four privacy zones, and please follow below steps to set:
1.
Select <Enable Privacy Zone> option;
2.
Select the area no (Area 1 ~ Area 4);
3.
Click [Setup] to adjust position of mask area;
4.
After finishing position adjust, click right key of mouse to return back [Privacy zone] interface;
5.
Click [Apply] to save the above setting.
¾ Sequence time: allow you set sequence time, and
minimum time can be set to 3 seconds.
¾ VGA Resolution: allow you select VGA output, including
800x600, 1024x768, 1280x1024 and 1440x900.
¾ Transparency: allow you adjust menu’s transparency, and
its range is 1~100.
¾ Margin: allow you adjust the whole screen’s margin.
Details operations please refer to the Picture 5-6.
¾ Volume: allow you adjust the MDVR volume shown as
Picture 5-7.
Note: Please restart the device after adjusting VGA resolution.
Picture 5-5
Picture 5-6
Picture 5-7
Picture 5-9
Picture 5-8