Bolide SVR9000DMOB_W - Manual (Page 29)

User Manual
25
5.3.7 System
5.3.7.1 General
Click [Main Menu
ÆSystemÆGeneral] to enter into the interface shown as Picture 5-40.
5.3.7.2 '676HW
5.3.7.3 1736HUYLFH
Click [Main menu
ÆSystemÆGeneralÆNTP] to enter into the interface shown as Picture 5-42.
5.3.7.4 8VHUV
Click [Main Menu ÆSystemÆusers] option and then enter into the interface shown as Picture 5-43.
The model supports up to seven users with one
Admin and six users.
Click [Edit] button to enter into the [User Edit]
interface shown as Picture 5-44.
Click [Main menu
ÆGeneralÆDST] to enter into the
interface shown as Picture 5-41 and now you are allowed to
configure DST status and mode.
You will be allowed to modify system date, time,
date/time format, language, video format and auto logout.
And click [DST Setup] button to enter into the below
interface shown as Picture 5-40
¾ NTP Service˖Allow you enable or disable the function.
¾ Server Address: Select NTP server (time.windows.com /
time.nist.gov / pool.ntp.org).
¾ Zone: select according time zone.
The above change will be available only when system
connected to internet.
Note: When NTP function is set to “Enable”, system will
calibrate the time at every 00:07:50 and every start-up.
Picture 5-40
Picture 5-41
Picture 5-42
Picture 5-43