Bolide SVR9000DMOB_W - Manual (Page 16)

User Manual
12
5.3 Main menu
5.3.1 Display mode
5.3.1.1 Live mode
Go to [Main menu
ÆDisplayÆLive] to enter into the Live mode interface shown as Picture 5-3.
Explanation ˖
1 ǃThe modifications will be available after clicking [APPLY] button on the bottom of the sub-menu
windows and being prompted to save and then clicking [ok] button.
2 ǃIf you want to cancel the modification, click [Exit] button to exit the menu.
3 ǃWhen clicking [DEFAULT] button, all system default values will be reset to default value.
4 ǃSystem default value indicates the value pre-set at the factory.
On preview mode, click [Menu] button on the front
panel or Remote controller to enter into Main menu
interface shown as Picture 5-2. And also you can click
[ ] icon to enter into the main menu screen. In Main
Menu mode, you can control device management
settings, such as Display, Record, Network, Search,
Device and System setting etc.
Channel: allow you setup the channel you desired.
Name: allow you setup the channel name, and system
support up to eight characters or four Chinese characters.
Position: allow you setup the display position of each
channel.
Color: Click [Setup] option to enter into the [Color setup]
interface shown as Picture 5-4.
Live: allow you enable [Live] surveillance function
Live time: allow you enable [Live time] appear in the
preview screen.
Record time: When set to “Enable”, you are allowed to
record system time into the record history.
Copy: allow you copy all data of one channel to any other
one
Above picture 5-4 is the Color Menu where you can
adjust image brightness, saturation, contrast and hue
parameters of each channel.
Picture 5-2
Picture 5-3
Picture 5-4