Campomatic WM80LS - Manual (Page 12)

The ground wire cannot be connected to the plastic pipe, gas conduit
or hot-water pipeline. If the ground wire is connected to the improper
ground conductor, electric shock may occur.
When ready for installation, ensure the power supply complies with the
following items:
The washing machine must be grounded. If the washing machine has a
fault or cannot run normally, the current can be conducted to the
ground, minimizing the risk of electric shock.
To guarantee your safety, use the three-core socket and check to
ensure it is grounded accurately and reliably. (The washing machine
has been equipped with a three-core socket.)
Protect the power cord.
The power cord has to be positioned so that it will not be stepped
on, pressed or clamped by the article on or next to it. Pay special
attention to the power cord of plug, socket and power cord
◆ Fuse or breaker of 220V, 50Hz, 15A.
◆ When the heating function is used, the maximum current of the washing machine may
reach 10A. Ensure that your power supply unit (current, voltage and cable) can meet the
normal load requirements of the appliance.
Service Instructions
Power supply and grounding
Grounding