Residual heat, Special functions – Caple C2470SS User Manual
Page 33
Italiano
English
Français
Deutsch
Español
Nederlands
Português
RESIDUAL HEAT
The term “Residual heat” is used to describe the heat which the oven has accumulated
inside it while cooking foods.
This heat is gradually dispersed over time and may still be a culinary resource if
managed properly: your oven indicates the internal temperature, after turning the oven
off, until it drops to 50°C.
This way you can use it to heat up food, unfreeze foods at a low temperature, or to
indicate the level of safety in the kitchen.
SPECIAL FUNCTIONS
“CLEAN” or “EASy CLEAN” FUNCTION
This function can only be activated when no other function of the oven has been
activated. The correct functioning of the “easy clean” function is dependant on the use
of self-cleaning side panels.
In this mode the special command assumes the “CLEAN” function
Do not put dishes in the oven, do not use this special function for cooking!
ACTIvATION
LIGHTLy TOUCH THE KEy ON THE
CONTROL PANEL
By LIGHTLy
TOUCHING THE KEy SHOwN IN THE
FIGURE AND TRIGGERING THE “CLEAN”
FUNCTION, THE OvEN REACHES THE
TEMPERATURE OF 50°C AND STAyS AT
THIS TEMPERATURE FOR HOUR.