Coda Audio C5 - Manual (Page 31)

31
Technical Specifications
AUDIO
Input impedance 10k balanced
Max Input level +20dBu
Frequency Response 20Hz - 20kHz+/-0.5dB
@ 4 Ohm load
Output noise -106dB A weighted Ref max output, 22kHz BW
Distortion <0.05% (1kHz, -3dB output. 22kHz BW)
PROTECTION SYSTEMS
Output over current Initially gain reduced to maintain control, extreme or persistent over current causes shutdown
Over temperature limiters applied, persistent over temperature causes shutdown
Mains Brownout Automatic protection & recovery
Switch on surge Soft-start current inrush limiting
DC on output Immediate shutdown, power cycle to recover
INDICATORS & CONTROLS
Indicators Per channel Sig, Limit -6dB, Limit
Indicators Per channel pair Power, Protect, Bridge, Network, User DSP active
Front panel controls:
Per channel pair User DSP Defeat - can be disabled with C-Net
Power switch
Rear panel:
Per channel pair Contact closure inputs and Shutdown input (Aux)
Monitoring facilities Input signal level, Output signal level
Output current level
Temperature
Limiter operation
Protection system operation
Driver impedance
AMPLIFIERS
Type High efficiency class D
Number of channels Two / Four
Output power (RMS program, 20Hz-20kHz all channels driven)
per channel 1,250W in to 2 Ohms
800W in to 4 Ohms
450W in to 8 Ohms
per bridged pair 2,500W in to 4 Ohms
1,600W in to 8 Ohms
900W in to 16 Ohms
Slew rate >80V/us
Damping factor 120 ref 8 Ohms