Coda Audio C5 User Manual
Page 8
8
the amplifier can be well supported. Damage caused by insufficient support is not covered
by the warranty.
To prevent damage to the front panel it is recommended that plastic cups or washers are
fitted underneath the rack mounting bolt heads.
It is possible to mount multiple C5 amplifiers without ventilation gaps between them but it
is essential that an unobstructed flow of clean air is available from the back of the unit to
the front. It is important the neither the air intakes at the rear of the unit or the exhaust
vents at the front are covered.
The amplifier should never be exposed to rain or moisture during operation or storage. If
the unit does come into contact with moisture, remove the AC power cord immediately
and leave it in a dry and warm location to dry out.
Note that when any equipment is taken from a cold location into a hot humid one,
condensation may occur inside the device. Always allow time for the equipment to attain
the same temperature as its surrounding environment before connecting the AC power
cord.