Vfs gateway, Vfs gateway -6 – Comtech EF Data VIPERSAT File Streamer v1.2.x User Manual
Page 34
Advertising
Starting VFS
3-6
VFS User Guide
Figure 3-5 VFS Event Log, Initial
VFS Gateway
If the VFS Gateway is not connected, ensure that the correct IP address has been
specified. This is the address of the Vipersat modem (e.g., CDM-570L) on the
local network that serves as the gateway to the VMS.
To change the IP address, select VFS Gateway from the Edit pull-down menu
to open the Connect to VFS Gateway dialog window and enter the new
address.
Figure 3-6 Connect to VFS Gateway dialog
Once VFS has been started and authorized, the next step is to create a new
session or sessions. This is described in the next section, Creating a VFS
Session.
Advertising