COWON S9 - Manual (Page 32)

32 COWON S9
Configure settings and connection for COWON S9’s Bluetooth
function.
Search
Search for Bluetooth headsets in COWON S9’s proximity.
Be sure to have the Bluetooth headset in pairing mode. Pair
the COWON S9 with the discovered Bluetooth headset to use.
Please refer to headset’s manual for its pairing instructions.
Use
Turn on/off the Bluetooth mode. Enabling Bluetooth feature
may reduce the battery capacity at a faster rate than usual.
Delete
Delete the selected Bluetooth headset. Deleted headset
must be re-searched and re-paired in order to use it again
with COWON S9.
This feature is only compatible with Bluetooth headset.
Once paired, Bluetooth function will remain in operation even
when the Setting mode is closed.
There may be a delay in synch between video and sound
when playing certain kinds of high resolution movies.
Volume control, beep sound, fade-in, and audio L/R control
will not work.
+
System
• Hold mode
Set to select hold state(hold all / hold touchscreen only).
• Audio L/R
Adjust the audio volume balance of left/right.
• USB Mode
Set the USB connection method.
MSC will recognize the device as mass storage device.
Set as MTP if using MSDRM.
• Load defaults
Restore all settings to the factory default, except for the
language setting.
+
Bluetooth
Settings Mode