D.T. Systems Micro-iDT Z3000 (ex. serial #A12345) User Manual
Page 10
10
PARTS & FUNCTIONS CONT.
Magnet Indicator (Red Mark)
The RED mark indicates the location of the
magnet in the transmitter. The indicator is
used to turn the receiver ON/OFF and for ID
programming.
Transmitter Indicator Light
When any of the buttons on the transmitter is pushed,
the RED light will turn on to indicate that the
transmitter is being operated. When the battery is low,
the RED light will flash rapidly.
Remote Training Buttons
Pressing the “NICK” button causes the collar to
administer a Momentary, or ‘Nick’ Stimulation.
Pressing the “CONT” button gives a Continuous
Stimulation. Pressing the red button on the left side
causes the collar to Vibrate only.
Two or Three Dog Model Toggle Switch
(Micro-iDT Z3002 and Z3003 only)
Switching between units can be controlled by
moving the toggle selection switch to the
desired unit.