D.T. Systems Micro-iDT Z3000 (ex. serial #A12345) - Manual (Page 13)

13
TURNING THE UNIT ON AND OFF
Turning the Collar Unit ON
1. Hold the Red Mark (Magnet
Indicator) on the left side of the
transmitter directly against the Red
Mark (Magnetic Switch Indicator)
on the front of the collar receiver.
2. A small red LED light inside the Collar Unit will
light up solid for about 1 second, and then will
begin to flash.
3. You may remove the Transmitter away from the
Collar Unit as soon as the LED light starts flashing
4. The Collar Unit is now ON. The LED light should
continue to flash to indicate the ON status.
Turning the Collar Unit OFF
1. Hold the Red Mark (Magnet Indicator) on the left
side of the transmitter directly against the Red
Mark (Magnetic Switch Indicator) on the front of
the collar receiver.
2. A small red LED light inside the Collar Unit will
light up solid for about 1 second, and then will
begin to flash.
3. You may remove the Transmitter away from the
Collar Unit as soon as the LED light starts flashing
4. The Collar Unit is now OFF. The LED light
should no longer flash to indicate the OFF status.