D.T. Systems Micro-iDT Z3000 (ex. serial #A12345) - Manual (Page 14)

14
BATTERIES
All Micro-iDT™ training collars are equipped with
rechargeable Nickel Metal Hydride (NiMH) batteries.
NiMH batteries are not memory sensitive and do not
require depletion before recharging.
The batteries come partially charged from the factory.
It is, however, recommended that you give the battery
a full charge before the first use. This takes about 12
hours.
Remember - Always keep batteries away from
flammable substances (especially when charging).
When storing the unit for a long period, remember to
give full charge (12 hours) to the battery regularly.
This should be done once every 4 to 6 weeks.
The transmitter uses a 9V replaceable battery (not
included). Be sure to pay attention to the “+” and “-”
charges when inserting the battery.
Battery Charging Procedure
1. Make sure the unit is off.
2. Plug the charger into a standard
electrical outlet.
3. Attach charging cable to charger and
plug into collar unit.
4. Charge the battery for no more than 12 hours.
5. After charging, disconnect the battery charging cable from the
receptacle and securely replace rubber battery receptacle cover.
6. Test the system to make sure that unit is working properly.