DFI CR960-HM76 - Manual (Page 49)

www.dfi .com Chapter 4 BIOS Setup
49
Chapter 4
NB PCIe Bifurcation Configuration
This field is used to configure the parameters of CPU PEG Bifurcation.
PEG bifurcated confi gura-
tion.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
NB PCIe Bifurcation Confi guration
PEG Bifurcation [x16]
Chipset
PEG Birfurcation
x8, x4, x4
Reserved
x8, x8
x16
Boot
Select the keyboard
NumLock state.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Boot Confi guration
Bootup NumLock State
Quiet Boot
Fast Boot
CSM16 Module Version
Boot Option Priorities
Boot Option #1
Boot Option #2
Hard Drive BBS Priorities
CD/DVD ROM Drive BBS Priorities
 CSM Parameters
Save & Exit Chipset Advanced Security Main Boot
[On]
[Disabled]
[Disabled]
07.69
[SATA PS:ATAPI...]
[SATA PM:ST500DM0...]
Bootup NumLock State
This allows you to determine the default state of the numeric keypad. By default, the
system boots up with NumLock on wherein the function of the numeric keypad is the
number keys. When set to Off, the function of the numeric keypad is the arrow keys.
Quiet Boot
Enable or disable the quiet boot function.
Fast Boot
Enable or disable boot with initialization of a minimal set of devices required to
launch active boot option. It has no effect on BBS boot options.
Skip VGA When it is enabled, BIOS will skip EFI VGA driver.
Skip USB When it is enabled, USB devices will not be available after OS boot.
When it is disabled, USB devices will be available before OS boot.
Skip PS2 When it is enabled, PS2 devices will be skipped.
Boot Option #1 and #2
Set the order of the system boot.
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
ESC: Exit
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
ESC: Exit