Chapter 8 – DFI HM961-HM86 User Manual
Page 88
www.dfi .com
Chapter 8 Intel AMT Settings (HM961-QM87)
88
Chapter 8
33. In the Intel(R) Remote Setup And Configuration menu, select Provisioning Re-
cord then press Enter.
Intel(R) Management Engine BIOS Extension v9.0.0.0024/Intel(R) ME v9.0.10.1372
Copyright(C) 2003-12 Intel Corporation. All Rights Reserved.
INTEL (R) REMOTE SETUP AND CONFIGURATION
[ESC] = Exit
Current Provisioning Mode
Provisioning Record
Provisioning Server IPV4/IPV6 _
Provisioning Server FQDN _
> RCFG
> TLS PSK
> TLS PKI
Provision Record is not present
34. Select Previous Menu until you return to the Intel(R) Remote Setup And Configu-
ration menu. Select Provisioning Server IPV4/IPV6 then press Enter. Type server
address then press Enter.
Intel(R) Management Engine BIOS Extension v9.0.0.0024/Intel(R) ME v9.0.10.1372
Copyright(C) 2003-12 Intel Corporation. All Rights Reserved.
INTEL (R) REMOTE SETUP AND CONFIGURATION
Current Provisioning Mode
Provisioning Record
Provisioning Server IPV4/IPV6
_
Provisioning Server FQDN _
> RCFG
> TLS PSK
> TLS PKI
Provisioning server address
35. In the Intel(R) Remote Automated Setup And Configuration menu, select Provi-
sioning Server FQDN then press Enter. Type FQDN of provisioning server then press
Enter.
Intel(R) Management Engine BIOS Extension v9.0.0.0024/Intel(R) ME v9.0.10.1372
Copyright(C) 2003-12 Intel Corporation. All Rights Reserved.
INTEL (R) REMOTE SETUP AND CONFIGURATION
Current Provisioning Mode
Provisioning Record
Provisioning Server IPV4/IPV6 _
Provisioning Server FQDN
_
> RCFG
> TLS PSK
> TLS PKI
Enter FQDN of provisioning server
<ENTER> = Complete Entry [ESC]= Discard Changes
36. In the Intel(R) Remote Automated Setup And Configuration menu, select RCFG
then press Enter. Select Start Configuration, and type Y then press Enter.
Intel(R) Management Engine BIOS Extension v9.0.0.0024/Intel(R) ME v9.0.10.1372
Copyright(C) 2003-12 Intel Corporation. All Rights Reserved.
INTEL (R) REMOTE CONFIGURATION
[
] = Move highlight [ENTER] = Select Entry [ESC]= Exit
Start Confi guration
This will activate Remote Confi guration.
Continue: (Y/N)
[
] = Move Highlight [Enter] = Select Entry [Esc]= Exit
[Enter] = Complete Entry [Esc]= Discard Changes