Installing fs700 series onto a carrier board, Chapter 2 – DFI FS700 User Manual
Page 17
www.dfi .com
Chapter 2 Hardware Installation
17
Chapter 2
Installing FS700 Series onto a Carrier Board
1. The photo below shows the locations of the mounting holes and the bolts already fixed in
place.
2. Grasp FS700 Series by its edges, insert it into the carrier board, and you will hear a
distinctive¨click¨ indicating FS700 Series is correctly locked into the position.
FS700 Series
Carrier board
3. Press down FS700 Series and use the mounting screw to fix FS700 Series on place.
Important:
The carrier board used in this section is for reference purpose only and may not
resemble your carrier board. These illustrations are mainly to guide you on how to
install FS700 Series onto the carrier board of your choice.
Mounting hole
Standoff Bolts
Short screws
Carrier board
FS700 Series