DFI FS700 - Manual (Page 9)

www.dfi .com Chapter 2 Hardware Installation
9
Chapter 2
Mechanical Diagram
FS700 Series Module
Top View
0.00
18.00
52.00
70.00
0.00 2.50 23.65 56.50 64
.90
70.00
3.95
11.53
66.06
3.00
67.00
38.92
Bottom View
System Memory
DDR3
Important:
Electrostatic discharge (ESD) can damage your processor, disk drive and other com-
ponents. Perform the upgrade instruction procedures described at an ESD worksta-
tion only. If such a station is not available, you can provide some ESD protection by
wearing an antistatic wrist strap and attaching it to a metal part of the system chas-
sis. If a wrist strap is unavailable, establish and maintain contact with the system
chassis throughout any procedures requiring ESD protection.
The system board is equipped two 1GB onboard system memorys that support DDR3.
DDR3