Chapter 2 – DFI Q7-100 User Manual
Page 24
Advertising
www.dfi.com
Chapter 2 Hardware Installation
24
Chapter 2
The lithium ion battery powers the real-time clock and CMOS memory. It is an auxiliary source
of power when the main power is shut off.
Safety Measures
• Danger of explosion if battery incorrectly replaced.
• Replace only with the same or equivalent type recommend by the manufacturer.
• Dispose of used batteries according to local ordinance.
Battery
Battery
MXM Connector
The MXM connector is used to interface the carrier board with a Qseven board. Refer to the
following page for the pin function of this connector.
MXM connector
Advertising