DFI Q7-100 - Manual (Page 29)

www.dfi.com Chapter 2 Hardware Installation
29
Chapter 2
SPI JTAG Connector
1
2
7
Pin Pin Assignment Pin Pin Assignment
1 3V_standby 2 Ground
3 CS 4 CK
5 SO 6 SI
7 HOLOD-
Battery Low
This jumper is used to simulate the signal status that indicates the external battery is low. By
setting to pins 1 and 2 to On, it sends a battery low signal to the module.
1-2 Off: Normal
(default)
1-2 On: Battery low
1 2
1 2