Digi-Star NT 460 - Manual (Page 20)

16 NT 460 User’s Manual D3840-US Rev A
Set Application Width
Set Application Rate
1. Press .
Width
will display.
2. Press .
Note:
The value is decimal – 40
should be entered as 400. The
display will show 40.0.
Note:
Width should not be entered
very often.
Note:
The GPS Measurement Unit
Value
(AUNIT),
menu 3 in Setting
Options, see page 33, will
determine the unit of measure.
1. Press .
Rate
will display.
2. Press .
Note:
The value is decimal – 40
should be entered as 400. The
display will show 40.0.
Note:
The GPS Measurement Unit
Value
(AUNIT),
menu 3 in Setting
Options, see page 33, will
determine the unit of measure.
Application Rate Tolerance
Activate alarm by changing the Tolerance (Menu 4, D.A.N. 442,
TOLER
)
from OFF to .5, 1, 2, etc. Tolerance is in Tons/Acre or Tonnes/Hectare.
Default is OFF. The front panel light and beeper will periodically sound
when the Actual Application Rate varies from the Rate Set by the tolerance
selection.
Audio Alarm
Press 404
[SELECT]
to enter buzzer menu. Select OFF or ON. 1 – 4 are
not used.
1
2
1
2
w i d t h
r a t e