Digi-Star NT 460 - Manual (Page 23)

Transfer Data
D3840-US Rev A NT 460 User’s Manual 19
TRANSFER DATA
The indicator is equipped with a
USB drive port. The USB drive used
with the indicator holds thousands
of data records and allows for easy
transfer to PC.
1. Insert USB drive. Indicator will
automatically detect the USB
drive
2. Press to save records to
USB drive.
Note:
This action appends values
already on the UBS drive. No data
is lost.
Note:
It takes five minutes to
download data when memory is
25% full.
3. Press 1 to transfer Field, ID,
Total Weight, and Acres Data
from Indicator to USB. Note:
This is only necessary if Field or
ID data has been modified
using indicator keypad.
4. Press 9 to transfer Field, ID,
Total Weight, and Acres data
from USB drive to indicator.
Insert USB drive here to
download data records
U S B I N
1
E N T E R – S A V E R E CO R D S TO U S B
I - F I E L D + I D T O U S B
9 - U S B T O F I E L D + I D
3 4
2
Important: This action will
overwrite Field names, ID
names and Accumulator values
in the indicator.