Digi-Star Case IH 1250 - 12/16/24 - Manual (Page 11)

Scale Kit Mounting Installation - 24 Row
D3870-US Rev B Case IH Planter Scale 9
9. Remove the U-bolt on the front bracket and lift up the hopper 1-1/2”.
10. Bolt front top bracket to existing front hopper leg using 3/4" x 2” bolt and 3/4" two-way lock nut.
11. Install load cell (part number 400061) to the front base bracket using 3/4" x 3-1/2” bolt and 3/4" lock nut.
Make sure arrow load cell decal is pointing downward ( See Front Load Cell Detail). Install the short
load cell end to the front top bracket using 3/4" x 3-1/2” bolt and 3/4" lock nut. Reuse frame U-bolts and
5/8” nuts.
Rear Load Cell and Bracket
12. Install rear brackets in the same manner as the front brackets. Use one existing 5/8” U-bolt, plus one
new 5/8” x 8.75 U-bolt and 5/8” top lock flange nut to bolt the rear base bracket to planter main frame.
Install rear top step bracket with 3/4" x 2.0 bolt and 3/4" two way lock nut. Install 400061Load Cell-2-
1/8” DB with 3/4" x 3-1/2” bolt and 3/4" lock nut. Make sure load cell decal must point downward .