Digi-Star Case IH 1250 - 12/16/24 User Manual
Page 6
Scale Kit Mounting Installation – 12, 16 Row
4
Case IH Planter Scale
D3870-US Rev B
Right Side View
7. Raise hopper leg support 2-3” and mount right hand top support to hopper leg support with two
existing U-bolts and nuts.
Note: Top support should rest against hopper leg support.
8. Mount right hand bottom support to inner planter frame plate with 1/2" x 1.5 bolt and 1/2" serrated
flange nut.
9. Mount load cell to right hand bottom support with 3/4" x 3-1/2” bolt and 3/4" top lock nut.
IMPORTANT: Make sure the arrow on the end of the load cell is pointed down. Mount short
load cell end (side with single mounting hole) to top support with 3/4" x 2.0 fine thread bolt. Apply
thread sealant and tighten to 1/16” clearance. See Detail A on page 3.
10. Align all supports and load cell and tighten all hardware.
11. Repeat for left hand side.