Digi-Star Diet Manager Full Guide - Manual (Page 19)

19 Diet Manager User’s Guide
When all the data has been sent to the DataKey ™ , a message box will appear showing the status of the data
sent and the right-hand window will be blank.
Sending a Single Load to the DataKey ™
To send a single load at a time, highlight the load you want to send to the DataKey ™ by clicking on it in the
right-hand window.
Click on the Send One Load button. This will send the selected load to the DataKey ™ . No other loads
will be sent.
Send One Wagon
The Send One Wagon selection automatically splits the loads between the wagons.
Send One Load
The Send One Load selection sends only the load highlighted.
Reviewing Loads
To review the Corrals in a combined load, double-click the load in the right-hand window. This will open a
new window that displays the feeding data for that load.
Appending data to the DataKey ™
When feeding data exists on the DataKey ™ and an
attempt is made to send additional feeding data to the
DataKey
™ , the following type message will appear;
To add the new data, click Yes.
Receive Data from the DataKey ™
To access the Receive Data screen, Select the Receive Data tab, or from the Main Menu, select DataKey ™ ,
Receive Data.