Digi-Star Stockweigh Datamaster Indicator - Manual (Page 11)

If you are not using a printer, just hold Shift+B and this will scroll back through your records which will include
the weight Gains in your ## column.
Step 4
Now keep weighing and collecting data:
WEIGHT
IDENT ## CODING
363 B181 0.1 ANGUS
390 A231 0.1 HEREFOR
400 A351 0.4 AXH
241 A129 0.0 HXC
301
B212 0.3 MGREY
433+ A107 0.1 LIMOUSI
449+ A197 0.2 LXA
Note: If there is a weight loss (0.0) will appear on
the bottom left hand side.
You have now successfully collected weight gain
data on ASteers@
To finish, press F10, then scroll through your
statistics for Steers1 using the enter button. (and
print if the printer is attached)
Keep Weighing? NO
Uploading Stockweigh Datamaster to your computer
Stockweigh Datamaster Computer Interface Program
This program is used to read data from a Digi-Star Stockweigh Datamaster and transfer it to an IBM compatible
computer through Windows 98, 95, or 3.1.
The data may then be sorted, printed and converted to a format recognized by standard spreadsheet
programs.
The program is simple to use and is controlled by selecting screen options using a mouse or keyboard
Ashortcut@ commands. All you have to do is have the correct cable to connect the Stockweigh Datamaster
Indicator to the computer.
Software Installation
When you purchase this software, you will receive a CD-Rom disk that contains the Stockweigh Datamaster
Indicator program.
Place the Disk 1 in CD-Rom drive.
If you are using Windows 98 or 95, then click the mouse on Start, and then on Run.
If you are using Windows V3.1, click your mouse on File, and then on Run.
Then type: D: SETUP, press Enter. (D represents CD-Rom drive letter.)
This will run a short procedure to copy the program files from the diskette to a hard disc directory called c:\WKD1. You
can use some other directory name if desired. An icon will also be set up in the Windows environment from which you
can start the Stockweigh Datamaster Indicator Data Transfer program.
11