ETA Centrino s doplňkovým příslušenstvím - Manual (Page 43)

Bowl assembly and distribution (E), (Fig. 11)
Put sealing E4 on the contact surface of the plastic base of knife E1. Hold the knife (on the
bottom) at the plastic base and slide it (with the blade up) to the hole in the container, then
turn it in the direction of the arrow on the sign CLOSE to the maximum position. Check
whether the sealing is put properly on its place in the bowl. Remove the knife from the
container in the opposite direction.
IV. TABLE OF USING THE APPLIANCE AND THE ACCESSORIES
Please consider the following tips for processing as examples and inspiration. They are not
intended to provide instructions, but to show possibilities of various food processing.
Choose the amount of the processed food so that the maximum volume of the containers
marked with the gauge line is not exceeded. Bigger amount of processed food has to be
divided into several portions and the volume of the containers has to be checked regularly.
We recommend stopping work from time to time, switching off the appliance and removing
possible food that was stuck on or that blocked accessories or walls of the bowls, the
blender and the lid (see par. I. SAFETY WARNING).
The food preparation (processing) times are only approximate, they depend on the
amount, the kind and the quality of used ingredients and they range in seconds to minutes
(see the table).
Accessory Food Maximum Time Speed Preparation
amount (seconds) (mm)
Big sickle- meat (beef, 500 g 15 MAX 30 x 30 x 30
shaped knife pork)
ice about 30 - 60 ICe -
16 cubes
Small sickle- meat (beef, 150 g 30 MAX -
shaped knife pork)
Kneading flour 1000 g 60 MIN - MAX -
adapter (according to
salt 10 g consistency of -
dough so that
yeast 10 g kneading is most -
effective)
sugar 10 g -
water 450 g -
fat 20 g soft - liquid
43
GB
/ 117