ETA Centrino s doplňkovým příslušenstvím - Manual (Page 45)

VI. TROUBLESHOOTING
Problem Cause Solution
The appliance won‘t Power supply not Check the power cord, the plug and
start connected the socket
The bowl of the blender, Check and fasten all the parts to the
the bowl lid, the big right position in order to unlock the
pusher, the mixing bowl safety lock
and the citrus press are
not mounted properly.
The appliance stops The lid/the citrus press Fasten the lid or the citrus press.
working became loose during
operation of the appliance
The big pusher was Move the big pusher below the level
moved above the
maximum level of the
filling hole
The processed food is Switch off the appliance, let it cool
too heavy down, divide the processed food into
smaller portions and process them
gradually
Knives, kneading and Switch off the appliance, remove the
whipping adapter and ingredients that were blocking the
graters blocked by hard accessories and then continue work
ingredients not
recommended for
individual adapters
liquid is leaking from There are impurities on Check or clean the sealing and the
the bottom of the the sealing or contact contact surfaces
mixing container surfaces (e.g. residues
of ingredients)
The sealing is worn out or Replace the damaged sealing with
damaged a new one of a similar type
Sealing on the knife is Insert sealing on the knife base
missing
45
GB
/ 117