Fat Bagger 200MM FAT TIRE KIT 2008 - Manual (Page 13)

www.fatbaggers.com 641-774-7499
28. Slide fender into place.
29. Use palm tap fender down, making sure that fender is tight down against frame struts.
30. Stand few feet behind motorcycle, sight down the top of fender to top the gas tank to make sure
fender is sitting level on motorcycle.
31. Once you have the fender positioned properly use right angle drill, to drill through holes that you
previously drilled. Drill from the inside of the frame out with fender in place, use 1/8 drill bit.
If fender is already paint
becareful not to scratch fender.
Make sure fender is tight
against frame struts.