Fat Bagger 200MM FAT TIRE KIT 2008 - Manual (Page 6)

www.fatbaggers.com 641-774-7499
3. Now you are ready to install the new swing arm, all the bearings and bushing are already installed
in the swing arm. Reinstall the swing arm just like it was a stock motorcycle, after installing the
swing arm you will be ready to install the shock spacers.
Reinstall shock and shock
spacer. Reinstall new swingarm.
Reinstall swingarm pivot. Reinstall Reinstall
Reinstall Reinstall Reinstall
4. You will reuse the stock shock bolts for the bottom of the shocks, for the top of the shocks you will
use the new 1/2” x 13 x 2 3/4 long shock bolts, with 5/8 inches shock spacers FBI102.
Tighten down shocks to new
swingarm.