Q-See QS408 - Manual (Page 25)

25
CHAPTER 4 BASIC OPERA
TION
PICTURE 4-10
VIDEO/AUDIO
Use the Video/Audio menu to set the resolution and camera video system on the DVR.
To configure video options:
STEP 1. Under VGA RESOLUTION, select
800x600 or 1024x768.
STEP 2. Under CAMERA SYSTEM, select
NTSC (North and most of South America) or
PAL (Brazil and Europe).
STEP 3. Click APPLY. Click CLOSE in the
confirmation window.
STEP 4. Click EXIT in all menus until all
windows are closed.
To configure audio options (only available on Channels 1 and 2):
STEP 1. From the Video/Audio menu, click VOLUME SETUP. A split-screen display view
appears.
STEP 1. Click any channel and adjust the slider to increase/decrease the volume for
listen-in audio.
STEP 1. Click X to return to the Video/Audio menu.
STEP 1. Click APPLY. Click CLOSE in the confirmation window.
STEP 1. Click EXIT in all menus until all windows are closed.