Q-See QS408 - Manual (Page 73)

73
CHAPTER 7 REMOTE ACCESS
REMOTE SETUP
Use the Setup tab to configure the settings of your system from a remote location. If the Main
Menu is open on the system, you will not be able to make changes to the system from the
remote location.
Opening Remote Setup
Click SETUP at the top of the main screen. The Remote Setup menu features the following
tabbed options: Record, Alarm, PTZ, Network, Setting, Host Info
Click to enter into setup
interface, this interface include record, alarm,
PTZ, network, setting and system information
six menus.
Record
Click
to enter into setup
interface; the parameter settings are the
same as on the DVR.
PICTURE 7-65
PICTURE 7-66
PICTURE 7-67
Alarm Setting
Click “ALARM” to enter into setup interface;
the parameter settings are the same as on
the DVR.
PTZ
Click
to access setup interface;
the parameter settings are the same as on
the DVR.