Q-See QS408 - Manual (Page 48)

48
STATIC IP
You will need to setup the network settings on the DVR to match the settings of the router to
which your DVR is connected.
Owners of 2Wire Brand routers should use DHCP.
To get the router settings:
STEP 1. To access the router’s settings you will need to enter the Command (CMD)
panel on a computer also connected to the same router.
STEP 2. Type “ipconfig” at the prompt
(Red arrow in Picture 7-14 ) to
access router settings.
STEP 3. Write down the IP4v address
(Blue arrow) as well as the gateway
and subnet mask numbers (Green
arrows).
A. WINDOWS XP – Select Run from
your Windows START menu (lower
left of screen) and type “cmd” after
the prompt.
Microsoft Office Outlook 2007
Microsoft Internet Explorer
All Programs
Devices and Printers
Default Programs
Help and Support
iTunes
Adobe Acrobat
Inbox Microsof... iTunes
start start
Shut Down Log Off
Run
B. WINDOWS VISTA and WINDOWS
7 – Click on the START menu
(Windows icon) in the lower left of
your screen. Type “cmd” into the field
that says, “Search programs and
files” and hit ENTER or click on the
magnifying glass icon.
PICTURE 7-12
PICTURE 7-13
PICTURE 7-14
Microsoft Office Outlook 2007
Sticky Notes
All Programs
Devices and Printers
Default Programs
Help and Support
Shut down
iTunes
Adobe Acrobat
cmd