Q-See QS408 - Manual (Page 60)

60
To set up the DVR for access through a dynamic domain name:
STEP 1. Return to the Network window in the DVR.
PICTURE 7-39
PICTURE 7-40
STEP 2. Click on DDN Settings (Purple
box in Picture 7-39 ) and then click
on the APPLY option. This will open
the DDNS Setup window.
STEP 3. In the DDNS Setup Window,
Select the service – MyQ-See or
DynDNS you are using and enter the
account information you registered
with the domain name service.
DDNS: Select the ON option from the drop
down menu.
Service: Select myq-see from the drop down
menu.
Host Name: Enter the account name you setup on the myq-see site.
Username: Enter the email address you used on the myq-see site.
Password: Enter the password you setup on the myq-see site.