Flowserve Modutronic 20 II Modulating Position Controlle - Manual (Page 5)


Limitorque Actuation Systems Modutronic 20 II FCD LMENIM4002-00 – 08/06
flowserve.com
1
Introduction
1.1 Safety Information
This Installation and Maintenance Manual was written for the user who is adding Modutronic 20 II
capability to an existing actuator or who wants to adjust and/or troubleshoot a previously installed
Modutronic 20 II Controller. These guidelines provide the information that is necessary to correctly
install, set up, calibrate, and troubleshoot the Modutronic 20 II Controller.
Your safety and satisfaction are very important to Flowserve. Please follow all instructions carefully
and pay special attention to safety.
The following methods will be used to emphasize text throughout this manual:
WARNING: Refers to personal safety. This alerts the reader to potential danger or harm. Failure to
follow the advice in warning notices could result in personal injury or death.
CAUTION: Directs attention to general precautions, which, if not followed, could result in personal
injury and/or equipment damage.
NOTE: Highlights information critical to the understanding or use of these products.
Bold text highlights other important information that is critical to system components.
CAPITALIZED text stresses attention to the details of the procedure.
Underlined text emphasizes crucial words in sentences that could be misunderstood if the word is
not recognized.
The purpose of these emphasized blocks of text is to alert the reader to possible hazards associated
with the equipment and the precautions that can be taken to reduce the risk of personal injury and
damage to the equipment.
Read and become familiar with the material in these guidelines before attempting installation, opera-
tion, or maintenance of the equipment. Failure to observe precautions could result in serious bodily
injury, damage to the equipment, or operational difficulty.
WARNING: Read this Installation and Maintenance Manual carefully and completely before
attempting to install or operate the Modutronic 20 II. Be aware of electrical hazards when
installing or performing maintenance on the Modutronic.
c
a
c