Flowserve MX-85 Actuator User Manual
Page 28
Advertising
Flow Control
Limitorque Actuation Systems
20
MX-85/140 Maintenance and Spare Parts
FCD LMAIM1341-00
STEP 7
Push the rotor shaft onto the protruding worm
shaft, aligning the rotor shaft slots with the worm
shaft pin. Slide the motor housing spigot/pilot into
the actuator housing.
7
STEP 8
Fit the four screws (#1-14) into the motor subas-
sembly mounting holes and tighten.
Advertising
This manual is related to the following products: