5 mounting of standard and optional controls – Flowserve QX Limitorque User Manual
Page 62
Advertising
Limitorque QX Electronic Actuator FCD LMENIM3314-00 – 5/11
62
Figure 6.10 - Terminal Blockm Assembly
6.4.1 Terminal Block Shield
Figure 6.11 - Terminal Block Shield
6.4.2 Terminal Block Removal
Step 1
Remove terminal block cover.
Step 2
Use Qty of 2 screws from terminal block or from end users bag to attach shield.
Step 3
Remount terminal block cover.
6-5 Mounting of Standard and Optional Controls
6.5.1 Installation
NOTE: RESTRICTIONS ON OPTION BOARD COMBINATIONS: Only one of the following can be on any unit: Modbus -
DDC, Profibus PA, Profibus DP, FOUNDATION Fieldbus, DeviceNet.
Advertising