Preparing for serial communications – Fluke Biomedical QED 6 User Manual
Page 64
Advertising
![background image](/files/785496/content/doc064.png)
QED 6
Users Guide
2-38
Preparing for Serial Communications
Several steps are required to prepare the Analyzer for serial communications
with an attached computer. The first is setting parameters for RS232 data
transfer.
Note
Ensure that the Baud Rate, Parity, Data, and Stop Bits settings
selected for the Analyzer match those set on the computer.
To set RS232 parameters on the Analyzer:
1. From
Main Menu 1
, press
more
to access
Main Menu 2
. The following
displays:
fcf026.eps
2. From
Main Menu 2
, press the
UTIL
softkey to display the following:
fcf055.eps
3. Press the
R232
softkey to display the following:
fcf056.eps
Advertising