Foxconn AT-7300 - Manual (Page 16)

24
BIOS SETUP
■ Install Windows 7/8
■ Install Drivers
Install OS
Optimal defaults are the best settings of this motherboard.
Always load the Optimal defaults after updating the BIOS or after clearing the CMOS values.
Select this option and press Enter, it will pop out a dialogue box to let you load the defaults. Select
<Yes> and then press <Enter> to load the defaults. Select <No> and press <Enter>, it will not load.
By this default, BIOS have set the optimal performance parameters of system to improve the perfor-
mances of system components. But if the optimal performance parameters to be set cannot be sup-
ported by your hardware devices (for example, too many expansion cards were installed), the system
might fail to work.
► Save as User Default Values
If you select this option and press <Enter>, a message will be displayed in the screen.
Select [Yes] to save the changes done so far as user defaults, select [No] or <ESC> to return to the
menu.
► Load User Default Values
If you select this option and press <Enter>, a message will be displayed in the screen.
Select [Yes] to restore/load the user defaults to all the setup options, select [No] or <ESC> to return to
the menu.