Foxconn AT-7300 - Manual (Page 6)

4 5
INTRODUCTION INTRODUCTION
1 USB 2.0 port
This USB port supports the USB 2.0/1.0 specification. Use this port for USB
devices such as keyboard, mouse, USB printer, USB flash drives and hard
disk drives, etc.
2 USB 3.0 port
This USB port supports the USB 3.0/2.0/1.0 specification. Use this port for
USB devices such as keyboard, mouse, USB printer, USB flash drives and
hard disk drives, etc.
As to Windows 7 system, you need to install the USB 3.0 driver in NanoPC
USB Disk before using it.
3 DVI DVI port
Connect monitor or TV that uses DVI connector to this port.
By using the DVI to VGA adapter that comes with your product, you can also
connect a VGA-compatible devices such as a monitor or projector.
4 HDMI HDMI port
The HDMI (High-Definition Multimedia Interface) port supports Full-HD
display devices.
Connect monitor or TV that uses HDMI connector to this port.
5 RJ-45 LAN port
Supports 10/100/1000Mb/s Ethernet network.
Connect network cable to access Internet.
6 Line out / SPDIF out port
Connects to powered analog speakers or recording devices with optical
connectors (3.5mm jack).
SPDIF function requires additional adapter and adapter cable.
7 Power input port
Connect power cord that come with your product.
1-2 Back Side View
1
3
2
4
5
6
7