Foxconn AT-7300 - Manual (Page 17)

26 27
INSTALL OS INSTALL OS
What kinds of hardware and software you need here:
1. Windows 7/8 Install USB Disk / USB DVD-ROM drive and Windows 7/8 Install CD (Other purchase)
2. NanoPC USB Flash Disk (In this package)
Windows 7(32-bit/64-bit) and Windows 8(32-bit) can’t be installed when “Launch CSM” is
set to “Disabled” in the BIOS setup.
4-1 Install Windows 7/8
1. Connect the Windows 7/8 Install USB Disk (or USB DVD-ROM drive) to one USB port of NanoPC.
2. Press power on button to turn on your computer.
3. Put the Windows 7/8 Install CD into the USB DVD-ROM drive if you use the USB DVD-ROM drive.
4. Computer will choose the boot device by BIOS default and start loading the files for installing the OS.
5. When the installation windows popup, set the related items and click “Next” to continue, then click
“Install now” button to start the setup.
6. When the license terms appear, choose accept and click “Next” to continue.
7. It will then ask you to select the installation type. Click “Custom (advanced)” to install a new copy of
Windows.
Please press <Del> key to enter BIOS Setup if you want to change the first boot device
for installing the OS. 8. The setup will display the hard disk partitions (160GB, in this example) of your system. If there
were other systems (such as Linux) installed previously, you need select them and click “Drive options
(advanced)” to delete them. When all partitions are clean, setup will display the biggest size of your
hard drive.