Foxconn 6627MA-RS2H User Manual
Page 17
Chapter 2 Installation Instructions
10
Memory
This motherboard includes two 240-pin slots with 1.8V for DDR2. You must
install at least one memory bank to ensure normal operation.
Installation of DDR2 Memory
1. There is only one gap near the center of the DIMM slot, and the memory
module can be fixed in one direction only. Unlock a DIMM slot by pressing the
module clips outward.
2. Align the memory module to the DIMM slot, and insert the module vertically
into the DIMM slot.
3. The plastic clips at both sides of the DIMM slot will lock automatically.
Warning :
Be sure to unplug the AC power supply before adding or removing
expan sio n c ard s or oth er system perip herals, esp ecially the
memory d evices, otherwise yo ur mo therb oard or th e system
memory might be seriously damaged.
128 针
112 针
For the detailed memory support list on this motherboard, please visit the websi-
te:
PDF 文件使用 "pdfFactory" 试用版本创建