Foxconn 6627MA-RS2H User Manual
Page 49
Chapter 3 BIOS Description
42
Load Optimized Defaults
Select this option and press <Enter>, and a dialogue box will pop up to let you
load the optimized BIOS default settings. Select <Y> and then press <Enter> to
load the optimized defaults. Select <N> and press <Enter> to exit without loading.
The defaults set by BIOS are the optimized performance parameters for the
system, to improve the performance of your system components. However, if the
optimized performance parameters are not supported by your hardware devices,
it will likely cause system reliability and stability issues. If you only want to load the
optimized default for a single option, select the desired option and press the
<F7> key.
Set Supervisor/User Password
The access rights and permissions associated with the Supervisor password are
higher than those of a regular User password. The Supervisor password can be
used to start the system or modify the CMOS settings. The User password can
also start the system. While the User password can be used to view the current
CMOS settings, these settings cannot be modified using the User password.
When you select the Set Supervisor/User Password option, the following message
will appear in the center of the screen, which will help you to set the password:
Enter Password:
Enter your password, not exceeding 8 characters, then press <Enter>. The
password you entered will replace any previous password. W hen prompted,
key in the new password and press <Enter>.
If you do not want to set a password, just press <Enter> when prompted to enter
a password, and the following message will appear on the screen. If no pass-
word is keyed in, any user can enter the system and view/modify the CMOS
settings.
PASSWORD DISABLED!!!
Press any key to continue
…
Under the menu
“Advanced BIOS Features Setup”, if you select “System” from
the Security Option, you will be prompted to enter a password once the system
is started or whenever you want to enter the CMOS setting program. If the incor-
rect password is typed, you will not be permitted to continue.
Under the menu
“Advanced BIOS Features Setup”, if you select “Setup” from the
Security Option, you will be prompted to enter a password only when you enter
the CMOS setting program.
PDF 文件使用 "pdfFactory" 试用版本创建