Foxconn 6627MA-RS2H User Manual
Page 47
Chapter 3 BIOS Description
40
PnP/PCI Configurations
PnP/PCI Configurations Menu
v
Init Display First
This item is used to set which display device will be used first when your PC
starts up.
v
Resources Controlled By
This option is used to define the system resource control scheme. If all cards
you use support PnP, then select Auto (ESCD) and the BIOS automatically
distributes interruption resources. If you install ISA cards not supporting PnP,
you will need to select
“Manual” and manually adjust interruption resources in
the event of hardware conflicts. However, since this motherboard has no ISA
slot, this option does not apply.
v
IRQ Resources
If you set
“Resources Controlled By” for “Manual”, you can modify the item.
Press the <Enter> key, then manually set IRQ resources.
v
PCI/VGA Palette Snoop
If you use a non-standard VGA card, use this option to solve graphic accelera-
tion card or MPEG audio card problems (e.g., colors not accurately displayed).
v
Maximum ASPM Supported
Control maximum level of ASPM supported on the given PCI Express links on
the system.
v
Maximum Payload Size
This option is used to maximum TLP payload size for PCI Express devices.
The unit is byte.
PDF 文件使用 "pdfFactory" 试用版本创建