Document Outline

• Pub. 43004-013F
  • Confidentiality Notice
  • Warranty
  • Table of Contents
  • Foreword
    • Scope of Manual
    • Nomenclature
    • Ordering Replacement Parts
    • Service and Repair
    • Safe Handling of CMOS Integrated Circuit Devices
    • Features of the CommandPLUS Series Desktop Console
    • Model Chart
    • Specifications
  • Description
    • General Description
      • Tone Remote Control
      • DC Remote Control
      • E&M Remote Control
  • Installation
    • General Considerations
    • Mechanical Receipt Inspection
    • FCC Interference Warnings
    • Equipment Required
    • Cable Installation Safety Considerations
    • Telephone Line Lightning and Over-voltage Protection
    • Line Connections
      • Line Considerations - Private Circuit
      • Circuit Conditioning
    • Line Level Settings
      • Line Input (Receive Audio) Level Adjustment
        • Desktop Console Adjustment
      • Line Output (Transmit) Level Adjustment
    • Types of Base Station Control
    • Installation
      • Electrical Interface
      • Ground Cable
      • Channel Interface Cable
      • Power Supply (3308-00124-00)
      • Battery Revert Power Supply (XCP0080A)
    • Accessories
      • XGM003A Gooseneck Microphone/ XDM003A Desk Microphone
      • Other Microphones
      • XCP0140A Headset Interface Box
      • Headset/Handset Connection
      • XFS002A Footswitch
      • System Jumper Table
  • CARD Suite Programming Software
    • General Description
      • Connections
      • Installation
  • Console Diagnostics
    • Entering the Diagnostic Mode
    • User Parameters Menu
      • Side Tone Volume Adjust
      • Microphone Selection and Sensitivity
      • Printer Error Messages
    • Clock and Display Set
      • Setting the Clock
      • Setting the Display Viewing Angle
      • Setting the Display Brightness
    • Service Diagnostics
      • Keyboard Diagnostics
        • Keyboard Test
        • LED Test
      • Audio Diagnostic
        • Test 1 – Communications Test
        • Test 2 – Audio Loop Test
        • Test 3 – Output Adjust
        • Test 4 – Gain Stage Test
        • Test 5 – Input Level Adjust
      • Internal Diagnostics
      • Alert Level
      • Page Level
      • Security
    • Start-Up Display
      • Boot-Up Error Code Definitions
      • Code Definitions
      • CARD Suite Software Version
      • Firmware Version – Host – DSP – Display CPK
  • Features and Options
    • DTMF Decode
    • Paging Encode
    • Positive Mode Control
    • Printer Interface
    • Logging Recorder Output Module
    • DC Control CP0010A/XCP0010A
      • Installation/Relocation
    • 4-Channel E&M Control CP0040A/XCP0040A
    • Supervisory Control CP0050A/XCP0050A
    • Direct Enhanced Full Duplex Phone Interface CP0070/XCP0070A
      • Ring Detect Sensitivity
    • External Enhanced Full Duplex Phone Interface CP0060/XCP0060A
    • Battery Revert XCP0080A
    • MDC1200 STAT-ALERT Signaling CP0650/TDN9413A
    • 25-Pair Telco Interface XCP0030A
      • Installation
    • Button/Elastomer Replacement (XCP0110A)
      • To Remove a Button
      • To Install a Button
  • Paging
    • Types of Paging
    • 2-Tone Paging
      • 2-Tone Paging Example
      • Group Call
    • Plectron Paging
      • Plectron Paging Example
    • 5/6-Tone Paging
      • 5/6 Tone Paging Example
  • Troubleshooting
    • Troubleshooting the CommandPLUS Series Desktop Console
    • Replacement Parts List
  • Main Circuit Board
  • Definitions and Acronyms