5 f-key functions within adonis, Page 20, Catcenter_master catcenter_slave 1 – Guntermann & Drunck CATCenter X systems Operation User Manual
Page 20
Guntermann & Drunck GmbH
CATCenter Operating Manual
Page 20
The connection between a master device and a slave device is established by
connecting the console ports of a slave device to the CPU ports of the master
device (
see the CATCenter Installation Guide, Chapter 2.5
). The ports used for this
connection can also be seen from the Target Info.
In this example, the connection between the CATCenter_Master and the
CATCenter_Slave 1 appears as follows:
CATCenter_Master CATCenter_Slave
1
CPU port of the master device connected to the console port of Slave 1
11 4
12 8
13 6
14 3
15 1
16 2
Connection Overview CATCenter Master -> CATCenter Slave 1
Main Power
AC 100-240 V, 47-63 Hz
5
6
7
8
CPU
9
10
11
12
13
14
15
16
21
22
23
24
CPU
25
26
27
28
29
30
31
32
5V DC/5A
Network A
Network B
5
6
7
8
Console
1
2
3
4
Console
1
2
3
4
5
6
7
8
Read instruction
carefully before
installing!
Avoid misuse!
KVM Switch.
17
18
19
20
21
22
23
24
Red.
Power
Note:
The information described here always relates to the target selected
in the SELECT menu. Connection information of targets that are not
selected is not displayed in the Target Info.
To exit the Target Info, press the
ENTER
or
ESC
key.
2.5
F-Key Functions within ADONIS
CATCenter_Master
CATCenter_Slave 1